In this catalog, we have collected all the Alusic accessories used for setting up structures, conveyors, benches, and supports made with aluminum profiles. Separated into the three AC, BH, and IM lines, according to their compatibility for the type of slot, you will find end caps, nuts, bolts, joints, anchor bases, handles, and all those accessories essential to complete your projects. In addition to these three main subdivisions, you will find two more: one for accessories specific to the construction of conveyor belts, such as side rails and guides, and the other one dedicated to cable channels.
Slot closure strips for aluminium profiles are closing or protective elements made from plastic or rubber for aluminium profile sections. They are used to seal or protect the edges of the profile sections, thus preventing ingress of dust, water or other external elements which could affect the condition of the component and thus the integrity of an assembled structure.
-Suitable for all types of AC slot
-Slot closures available in both rigid and soft PVC
-Also available in aluminium
The fasteners section incorporates a huge range of button-head and cap screws, square and roll-in nuts, washers and caps, as well as everything else necessary to assemble structures and join together aluminium profiles and bars in an effective and efficient manner.
-Cap, button-head and hammer-head screws, in stainless and galvanised steel
-Square, spring, rectangular, flanged and roll-in nuts
-Anti-rotation devices and washers
-Closing caps for screws and holes
Joints are specific assembly components required to correctly fasten multiple profiles together, ensuring strength and stability, as well as significantly facilitating the design and assembly phases. There are different types of joints, from internal and external through to articulated and self-tapping versions. The choice will depend only on the type of structure you wish to construct.
-Internal and external, pawl clamping, self-tapping, corner and straight joints
-Two- and three-way, square and rounded joints
-Quick orthogonal joints, one and two references
-Swivel joints in sizes from 30x30 to 45x90
Corner joints are a special category of support and fastening accessory. They are the most common joints when creating structures made from aluminium profiles due to their particular ease of use, generally used at the perpendicular joint between two profile sections.
-Sandblasted aluminium, Zamak and stainless steel corner joints
-Specific caps for each joint, in black and grey polyamide
-Sizes from 27x27 to 86x86
As their name suggests, feet are the lower support of any structure made from aluminium profile sections. Useful for levelling stairs or workbenches on uneven surfaces, they can also help correctly distribute the weight of the entire structure. They can simply rest on the floor, or be anchored in place.
-Fixed, swivel and vibration-damping feet
-Anchoring bases and floor brackets, complete with caps
-Load capacity from 400 to 2200 kg
Casters are wheels installed at the bottom of structures instead of feet to make stairs or benches mobile. There are different types of casters: fixed, useful for structures which need to be moved in a single direction; swivel casters, used for example for gravity systems and structures which need to move in multiple directions; and finally, braked casters, equipped with a safety measure to prevent involuntary movements.
-Fixed, swivel and braked swivel casters
-Rubber wheels and chromed steel brackets
-Load capacity from 50 to 180 kg
Panels are screens used to divide two different environments, for safety rather than aesthetic reasons. The panel or mesh is inserted in the slot of the profile and welded in place with the use of seals and multi-use elements.
-Safety fastening devices
-Seals and multi-use elements, in polyethylene and aluminium
-PET, polycarbonate, aluminium and laminate panels.
-Steel electrowelded mesh
Hinges are commonly used for fastening two rigid structures together, such as a door, window or hatch to jambs. They come in a wide range of sizes and dimensions, and they are made from different materials such as anodised aluminium, Zamak and polyamide.
-Anodised aluminium, painted Zamak and polyamide hinges
-AISI 303 pins, 3, 5 and 8 mm diameter
-Variable shapes and sizes
Handles can be inserted in aluminium profile sections to create doors and hatches in safety barriers, drawers and workbenches. Some handles can be customised in terms of colours and structure, by assembling pipes and profile sections of the required size with specific caps and supports.
-Standardised and modular handles
-Tough materials with good aesthetic finish
-Variable shapes and sizes
This category contains a variety of ranges of accessories for optimising the efficiency of hatches and aluminium structures more generally, such as, for example, door stops, magnets, tool holders and cable clips.
-Locks and closing devices for doors and hatches
-Magnets and door stops, pins and sliding carriages
-Lead counterweight assemblies, chains and rotary pins
-Safety limit switches and microswitches
LED (Light Emitting Diode) lights are an advance on traditional lighting technology, which generate light through semiconductors rather than gas discharge or metal filaments. Alusic's LED systems incorporate all the advantages of LED lighting technology in these practical lighting devices which can be easily inserted in the profile slot, thus removing bulky and obsolete fluorescent tubes, better organising and improving the neatness and efficiency of the workstations.
-Easily installed in the slot
-Luminous efficiency 79 lm/W (1200 lm/m)
-Extruded aluminium body, 6060T6 alloy
Alusic supplies some simple tools necessary to be able to drill out and prepare your own aluminium profile sections and assemble the structure perfectly.
-Specific drilling jigs for aluminium profile sections
-Drill bit diameters 5.5, 7.5, 7, 9 and 11mm
-Wrenches and high-strength adhesives
In this section, you can find all the Alusic accessories suitable for every conveyor belt, such as containment edges, sliding profiles, and edge supports.
-Supports and containment edges for conveyor belts
-Plugs and entrances for edges
-Support clamps, plugs, and brackets
In this section, profiles dedicated to special applications complementary to structural profiles are collected, such as the profile for steps or channels for cables.
-Medium and large-sized special cutting profiles
-7 different dies available
-Sizes range from 30x30 to 120x80
Thanks to the countless accessories available in the Alusic catalog, it is possible to assemble practically anything, from workbenches to support structures, from suspended walkways to industrial stairs.
Among the many changes aimed at improving our customer service, we have decided to reduce our use of plastic in our packaging, starting with the brand new packaging.